EN 10216-2 P235GH Tube Supplier & Exporter in India

EN 10216-2 P235GH Tube is a high-temperature pressure-purpose seamless steel tube manufactured according to European standard EN 10216-2. These tubes are widely used in boilers, pressure vessels, heat exchangers, refineries, petrochemical plants, and power generation industries due to their good strength at elevated temperature, weldability and toughness. EN 10216-2 Grade P235GH Carbon Steel Seamless Tubes are known for reliable performance under elevated temperatures and pressure conditions.

EN 10216-2 P235GH tubes at a glance

  • Material: P235GH (1.0345), a non-alloy carbon steel for pressure service at elevated temperature.
  • Strength: yield 235 MPa min (t ≤ 16 mm), tensile 360–500 MPa, elongation 25% (longitudinal).
  • Delivery condition: normalised (+N), seamless hot-finished or cold-drawn.
  • Typical use: boilers, steam lines, heat exchangers and pressure vessels up to about 400–450 °C.

Introduction to EN 10216-2 P235GH Tube

We are one of the trusted suppliers and exporters of EN 10216-2 P235GH Tube products for industrial and high-temperature applications. These tubes are manufactured using premium-quality carbon steel and tested according to international quality standards to ensure superior performance in demanding operating conditions.

EN 10216-2 Grade P235GH carbon (non-alloy) steel seamless tubes are specially designed for pressure applications where elevated temperature service is required. The grade P235GH is commonly used across industries such as oil & gas, petrochemical, chemical processing, power plants and heat exchanger manufacturing.

Our supplied tubes are known for excellent dimensional accuracy, smooth surface finish, high tensile strength, and long operational life. As experienced EN 10216-2 Grade P235GH tubes Suppliers, we ensure every product meets EN 10216-2 requirements for chemistry, strength and testing.

What is EN 10216-2 P235GH?

EN 10216-2 P235GH is a European standard specification for seamless steel tubes used in pressure applications. The material grade P235GH refers to non-alloy quality steel with specified elevated temperature properties.

The material number 1.0345 represents the steel designation for this grade. EN 10216-2 1.0345 P235GH Seamless Steel Tubes are widely selected because they provide:

  • Excellent weldability
  • Good machinability
  • High-temperature resistance
  • Superior pressure handling capability
  • Long service life
  • Good weldability (low carbon, 0.16% max)

In addition, these tubes are made by the seamless process, which improves structural integrity and pressure-bearing performance.

EN 10216-2 P235GH seamless tubes

EN 10216-2 Grade P235GH Carbon Steel Seamless Tubes Features

The demand for EN 10216-2 Grade P235GH Carbon Steel Seamless Tubes continues to increase due to their excellent industrial performance and reliability.

Key Features

  • High tensile and yield strength
  • Excellent performance at elevated temperatures
  • Normalised (+N) for a uniform, fine-grain structure
  • Smooth internal and external finish
  • Leak-proof seamless construction
  • Excellent dimensional precision
  • Suitable for high-pressure fluid transportation
  • Easy fabrication and welding properties

These characteristics make P235GH tubes ideal for critical engineering systems and industrial processing plants.

P235GH carbon steel boiler tubes
EN 10216-2 P235GH tube bundle

EN 10216-2 Grade P235GH Carbon Steel Seamless Tubes Specifications

Specification Details
Standard EN 10216-2
Grade P235GH
Material Number 1.0345
Product Type Seamless Steel Tubes
Outer Diameter Typically 10.2 – 219.1 mm; larger sizes to EN 10220 on request
Wall Thickness Typically 1.6 – 25 mm
Length Single Random, Double Random, Cut Length
End Type Plain end or bevelled end
Surface Finish Black (mill finish), varnished or oiled; pickled on request
Form Round Tubes
Manufacturing Type Hot Rolled / Cold Drawn

Chemical Composition of EN 10216-2 P235GH Tube

The chemical composition of EN 10216-2 P235GH Tube is controlled to EN 10216-2 limits (cast analysis), which keep it weldable and stable at elevated temperature.

Element Composition (%)
Carbon (C) 0.16 max
Silicon (Si) 0.35 max
Manganese (Mn) 0.60 – 1.20
Phosphorus (P) 0.025 max
Sulfur (S) 0.010 max
Aluminium (Al total) 0.020 min
Chromium (Cr) 0.30 max
Molybdenum (Mo) 0.08 max
Nickel (Ni) 0.30 max
Copper (Cu) 0.30 max
Niobium (Nb) 0.010 max
Titanium (Ti) 0.04 max
Vanadium (V) 0.02 max
Cr + Cu + Mo + Ni 0.70 max

Mechanical Properties of EN 10216-2 P235GH Seamless Steel Tubes

Property Value
Tensile Strength (Rm) 360 – 500 MPa
Yield Strength (ReH), t ≤ 16 mm 235 MPa min
Yield Strength (ReH), 16 < t ≤ 40 mm 225 MPa min
Yield Strength (ReH), 40 < t ≤ 60 mm 215 MPa min
Elongation (A) 25% min longitudinal / 23% min transverse
Impact (Charpy V) Tested to EN 10216-2 where required; values reported on the 3.1 certificate
Delivery Condition Normalised (+N)

The balanced mechanical properties make EN 10216-2 Grade P235GH Seamless Steel Tube supplier in India products highly suitable for industrial pressure systems.

Applications of EN 10216-2 P235GH Tube

Due to excellent heat and pressure resistance, EN 10216-2 P235GH Tube products are used in various industrial sectors.

Common Applications

  • Boiler manufacturing
  • Heat exchangers
  • Pressure vessels
  • Oil refineries
  • Chemical processing plants
  • Power generation industries
  • Gas processing systems
  • Petrochemical plants
  • Steam pipelines
  • Fertilizer industries
  • Water treatment plants

Because they combine good strength at temperature with easy welding, these tubes are widely preferred for boiler and process piping projects.

Advantages of EN 10216-2 1.0345 P235GH Seamless Steel Tubes

  • High Temperature Strength: These tubes perform efficiently in elevated temperature environments without losing structural integrity.
  • Superior Pressure Resistance: The seamless manufacturing process enhances pressure-bearing capacity and reduces the risk of leakage.
  • Good Weldability: EN 10216-2 Grade P235GH Carbon Steel Seamless Tubes have low carbon and controlled residual elements, so they weld easily in the field. However, like any carbon steel, they need water treatment or coating against corrosion.
  • Long Service Life: The tubes are manufactured using premium-grade raw materials for extended durability and reduced maintenance costs.
  • Easy Fabrication: Good weldability and machinability simplify installation and fabrication processes across industrial projects.

How EN 10216-2 P235GH Tubes Are Made

The production route, used by the approved mills we source from, plays a major role in the quality and performance of seamless tubes.

Tube Production Stages

  1. Raw material selection
  2. Billet heating
  3. Piercing
  4. Hot rolling or cold drawing
  5. Normalising (+N)
  6. Sizing and straightening
  7. Non-destructive testing
  8. Surface finishing
  9. Final inspection and packaging

As a result, every stage is carefully monitored to ensure compliance with international quality standards.

Testing & Quality Assurance

As reliable P235gh Carbon Steel Pipe Suppliers in india, we ensure strict quality control procedures for every supplied product.

Testing Methods

  • Hydrostatic Testing
  • Ultrasonic Testing
  • Eddy Current Testing
  • Flattening Test
  • Flaring Test
  • PMI Testing
  • Tensile Testing
  • Hardness Testing
  • Third-Party Inspection

All products are supplied with mill test certificates and quality documentation upon request.

Why Choose Us for EN 10216-2 Grade P235GH Tubes?

We focus on delivering industrial-grade tubing solutions with consistent quality and competitive pricing.

Our Strengths

  • Extensive stock availability
  • Fast delivery across India and worldwide
  • International quality standards
  • Competitive pricing
  • Custom size availability
  • Experienced export team
  • Reliable packaging solutions
  • Technical support assistance

As experienced EN 10216-2 Grade P235GH tubes Suppliers, we supply products suitable for both small-scale and large industrial requirements.

We supply premium-quality EN 10216-2 P235GH Tube products that meet international quality standards for pressure and elevated temperature applications. Our extensive inventory, technical expertise, and commitment to quality help us deliver reliable tubing solutions for industries worldwide. Whether your requirement is for boilers, heat exchangers, refineries, or power plants, our EN 10216-2 Grade P235GH Seamless Steel Tube supplier in India solutions are designed to deliver long-lasting performance and operational reliability.

Related Boiler and Pressure Tube Grades

If you are comparing P235GH with ASTM grades, see SA179 seamless tubes, ASTM A192 / SA192 tubes and A210 Grade C tubes. For a grade-by-grade overview, see our carbon steel boiler tubes page. Finally, for hotter service, see ASTM A213 T22 alloy tubes.

EN 10216-2 P235GH Tubes – FAQ

Is P235GH a carbon steel or an alloy steel?

P235GH (material number 1.0345) is a non-alloy carbon steel. EN 10216-2 covers both non-alloy and alloy tubes, but P235GH sits in the non-alloy group; alloy grades in the same standard include 16Mo3, 13CrMo4-5 and 10CrMo9-10.

What is the yield strength of EN 10216-2 P235GH tubes?

Minimum upper yield strength is 235 MPa for wall thickness up to 16 mm, 225 MPa for 16–40 mm and 215 MPa for 40–60 mm. Tensile strength is 360–500 MPa, with minimum elongation of 25% longitudinal and 23% transverse.

What is the ASTM equivalent of P235GH?

The closest ASTM tube equivalents are ASTM A106 Grade A or B for pipe and A179 / A192 for small-bore boiler tubes. They are similar, not identical, so equivalence should be confirmed against the design code before substitution.

What is the maximum temperature for P235GH tubes?

EN 10216-2 gives elevated-temperature proof strength values for P235GH up to 400 °C or more, and in practice it is used for boiler, steam and heat-exchanger service up to about 400–450 °C. For hotter service, 16Mo3 or chrome-moly grades are chosen.

In what condition are P235GH tubes delivered?

EN 10216-2 P235GH tubes are delivered normalised or normalised-formed (+N). Cold-finished tubes are normalised after the final cold-forming step.

Which tests and certificates come with P235GH tubes?

Each lot is supplied with an EN 10204 3.1 certificate (3.2 with third-party inspection on request) covering chemistry, tensile, flattening or ring tests, impact tests where required, a leak-tightness test (hydrostatic or electromagnetic) and dimensional checks.

Global Reach

ASC LLP boasts a robust global presence, committed to delivering unparalleled service and quality to clients around the world. Our dedication to prompt delivery and exceptional customer care sets us apart in the industry. Major corporations across the USA, Europe, Asia, and other regions place their trust in our high-quality EN 10216-2 P235GH Tube. This widespread trust underscores our reputation for reliability and excellence. By consistently meeting and exceeding the expectations of our international clientele, we continue to solidify our position as a leader in the global steel market.

ASC LLP P235GH tube supply

Countries We Export To

UNITED STATES, EUROPE, UK, UAE, SAUDI ARABIA, OMAN, KUWAIT, JORDAN, QATAR, INDONESIA, MALAYSIA, BRAZIL, SPAIN, ITALY, FRANCE, GERMANY, BAHRAIN, SRI LANKA, AZERBAIJAN, AUSTRALIA, AUSTRIA, PHILIPPINES, TURKEY, RUSSIA, IRAN, IRAQ, CANADA, KOREA, JAPAN, YEMEN, FINLAND, ZIMBABWE, HUNGARY, PORTUGAL, VIETNAM, MOROCCO, THAILAND, SOUTH AFRICA, MEXICO, SINGAPORE, GREECE, KUWAIT, POLAND, NEW ZEALAND, SWEDEN, SWITZERLAND, BELGIUM, BHUTAN, BANGLADESH, TAIWAN, ROMANIA, CAMBODIA, KAZAKHSTAN, AFGHANISTAN.

Follow us on: