ASTM A847 Tubes Supplier – Corten Square, Rectangular & Round Weathering Steel Tubing

We supply ASTM A847 tubes – cold-formed welded and seamless high-strength, low-alloy (HSLA) weathering steel tubing – in square, rectangular and round sections. A847 is the specification most buyers mean when they ask for Corten square tubes, Corten rectangular tubes or weathering steel hollow sections. All tubing is supplied with EN 10204 3.1 mill test certificates for bridge, building and architectural projects worldwide.

What are ASTM A847 Tubes?

ASTM A847/A847M is the standard specification for cold-formed welded and seamless high-strength, low-alloy structural tubing with improved atmospheric corrosion resistance. It covers round, square, rectangular and special-shape tubing for welded, riveted or bolted construction of bridges and buildings, and for general structural use where both strength and corrosion resistance are needed.

Like other Corten steel pipes, A847 tubing contains copper and other alloying elements that form a dense, tightly adhering rust layer (patina) under wet-dry weather cycles. Its atmospheric corrosion resistance is substantially better than carbon steel with or without copper, so in many applications it can be used bare – no paint and no galvanizing. With a minimum yield strength of 345 MPa (50 ksi) and tensile strength of 485 MPa (70 ksi), it is also stronger than common ASTM A500 carbon steel structural tubing.

ASTM A847 Corten square, rectangular and round weathering steel tubes

Key Properties of ASTM A847 Weathering Steel Tubes

  • Atmospheric corrosion resistance: copper and other alloying elements form a protective patina that slows further corrosion.
  • High strength: 345 MPa minimum yield and 485 MPa minimum tensile – allowing lighter sections than A500 tubing.
  • Paint-free service: when properly exposed, no paint or galvanizing is needed in many applications.
  • Good weldability: carbon limited to 0.20% max; welded with qualified procedures and weathering-grade consumables.
  • Architectural appearance: a warm rust-brown finish valued for façades, canopies and landscape structures.
  • Limited low-temperature toughness: notch toughness is not guaranteed unless Charpy testing is ordered as a supplementary requirement.

ASTM A847 Tube Shapes & Forms We Supply

  • A847 square tubes – columns, frames, railings and pergolas.
  • A847 rectangular tubes – beams, mullions, façade fins and purlins.
  • A847 round tubes – handrails, bollards, truss members and architectural columns.
  • A847 ERW (welded) tubes – cold-formed, the most common and economical form.
  • A847 seamless tubes – for smaller sections where seamless is specified.
  • Cut-to-length and fabricated tubes – cut, mitred, drilled or pre-weathered to drawing.

For other Corten and tube products, see our Corten steel seamless pipes, ASTM A423 Grade 1 Corten tubes for boiler air preheaters, and ASTM A334 Grade 6 tubes for low-temperature service.

ASTM A847 Corten square and rectangular hollow sections with rust patina
ASTM A847 weathering steel tubes used in a pedestrian bridge truss

ASTM A847 Tubes – Shapes, Sizes & Supply Range

Shape Typical Size Range Wall Thickness Type
Square 20 × 20 mm to 400 × 400 mm (3/4″ to 16″) 1.6 – 16 mm ERW / seamless
Rectangular 40 × 20 mm to 500 × 300 mm (1-1/2″ × 3/4″ to 20″ × 12″) 1.6 – 16 mm ERW
Round 21.3 – 610 mm OD (1/2″ NB to 24″) 1.6 – 20 mm ERW / seamless
Welded – specification limit Up to 88″ (2235 mm) periphery Up to 1″ (25.4 mm) —
Seamless – specification limit Up to 32″ (813 mm) periphery Up to 0.500″ (12.7 mm) —

Standard lengths are 6 m and 12 m (20 ft and 40 ft). All tubing is supplied with EN 10204 3.1 mill test certificates; cut lengths and small quantities are available.

Chemical Composition of ASTM A847 Tubes

Element Composition (%)
Carbon (C) 0.20 max
Manganese (Mn) 1.35 max
Phosphorus (P) 0.15 max
Sulfur (S) 0.05 max
Copper (Cu) 0.20 min
Iron (Fe) Balance

Mills add chromium, nickel, silicon and phosphorus within these limits to reach the required weathering performance. Atmospheric corrosion resistance can be estimated with ASTM G101; a corrosion index of 6.0 or higher is commonly specified for weathering steels.

Mechanical Properties of ASTM A847 Tubes

Property Round Tubing (min.) Square & Rectangular Tubing (min.)
Tensile strength 485 MPa (70 ksi) 485 MPa (70 ksi)
Yield strength 345 MPa (50 ksi) 345 MPa (50 ksi)
Elongation in 2″ (50 mm) 19% 19%

ASTM A847 Specifications & Designations

Item Details
Standard ASTM A847 / A847M
Material High-strength low-alloy (HSLA) weathering steel – Corten type
Type Cold-formed welded (ERW), seamless
Shapes Round, square, rectangular, special shapes
Ends Plain, square cut, bevelled
Surface Mill finish (bare), blasted, pre-weathered on request
Test certificate EN 10204 3.1 / 3.2
Optional requirements Charpy notch toughness testing, third-party inspection (TÜV, BV, SGS, Lloyd’s, DNV)

ASTM A847 Equivalent & Comparable Grades

Standard Equivalent / Comparable Grade
Trade name Corten A type weathering steel
ASTM plate / sheet A588, A242, A606 Type 4
EN hollow sections S355J2WH (EN 10219)
EN plate (nearest) S355J2W (EN 10025-5)

Equivalents are approximate. Confirm strength, toughness and corrosion requirements against your design code before substituting.

Manufacturing, Heat Treatment & Testing

Item Requirement
Forming Cold formed from weathering steel strip or plate
Welding Electric-resistance welded (ERW) or other automatic process; seamless also covered
Heat treatment Not required in the as-formed condition; stress relieving on request
Chemical analysis Heat and product analysis
Mechanical tests Tension test; flattening test on round tubing
Dimensional checks Outside dimensions, wall thickness, squareness, corner radius, twist and straightness
Optional Charpy notch toughness test (supplementary requirement)

Physical Properties of A847 Weathering Steel (Typical)

Property Value
Density 7.85 g/cm³
Melting range approx. 1,420 – 1,510 °C
Thermal conductivity approx. 45 W/m·K (20 °C)
Specific heat approx. 0.47 J/g·K
Modulus of elasticity approx. 200 GPa
Coefficient of thermal expansion approx. 12 × 10⁻⁶ /°C (20–100 °C)

Typical values for weathering steel, given for design reference. ASTM A847 does not specify physical properties.

ASTM A847 vs A500 vs A423 Grade 1 vs A588

Feature ASTM A847 ASTM A500 Gr C (shaped) ASTM A423 Gr 1 ASTM A588
Product Structural tubing Structural tubing Pressure tubes Plate, shapes, bars
Tensile, min 485 MPa 425 MPa 415 MPa 485 MPa
Yield, min 345 MPa 345 MPa 255 MPa 345 MPa
Corrosion resistance Weathering – can be used bare Carbon steel – needs coating Flue-gas dew-point & atmospheric Weathering
Typical use Bridges, buildings, façades General structures Air preheaters, economizers Bridges, structural plate

Choose A847 over A500 when the structure will be exposed and you want to avoid painting. For boiler tubes, use ASTM A423 Grade 1 instead – A847 is not a pressure-tube specification.

Applications of ASTM A847 Tubes

Application Typical Use
Bridges & pedestrian bridges Truss members, railings and bracing
Building structures Exposed columns, beams and frames
Architectural façades Fins, screens, mullions and cladding sub-frames
Transmission & signal structures Poles, gantries and towers in remote locations
Landscape & outdoor furniture Pergolas, planters, bollards, benches and fencing
Public art & sculptures Large outdoor installations
Canopies & shelters Bus shelters, walkways and carports

Not recommended for: continuously wet or buried conditions, marine splash zones and high-chloride environments, where the patina cannot stabilise.

Fabrication & Welding of A847 Tubes

  • Cutting and drilling: cuts and drills like other HSLA structural steel with standard tooling.
  • Welding: use qualified procedures and weathering-grade consumables (for example E80XX-W2 or equivalent) so welds match the tube’s colour and corrosion behaviour.
  • Detailing: design out water traps and allow drainage and airflow so the patina can form evenly; protect nearby concrete and stone from rust run-off during weathering.

Why Buy ASTM A847 Tubes from ASC LLP?

  • Complete Corten range: A847 tubing alongside Corten pipes, plates and sheets, so the whole structure weathers to the same finish.
  • Certified material: EN 10204 3.1 / 3.2 certificates with heat numbers marked on every bundle.
  • Cut-to-size and export-ready: cut lengths, small quantities and secure export packing.
  • Technical support: help choosing between A847, A500 and other Corten grades for your project.

Frequently Asked Questions – ASTM A847 Tubes

What is ASTM A847?

ASTM A847/A847M is the standard specification for cold-formed welded and seamless high-strength, low-alloy (HSLA) structural tubing with improved atmospheric corrosion resistance. It covers round, square, rectangular and special-shape tubing for bridges, buildings and general structural use.

Is ASTM A847 the same as Corten steel tubing?

A847 tubing uses the same weathering-steel principle as Corten: copper and other alloying elements form a protective rust patina. It is the ASTM structural tubing specification most often used when buyers ask for Corten square, rectangular or round tubes.

What are the mechanical properties of ASTM A847 tubes?

ASTM A847 tubing has a minimum tensile strength of 485 MPa (70 ksi), a minimum yield strength of 345 MPa (50 ksi) and a minimum elongation of 19% in 2 in. (50 mm).

What is the difference between ASTM A847 and ASTM A500?

Both are cold-formed structural tubing (HSS) specifications. A500 is plain carbon steel and must be painted or galvanized outdoors. A847 is a weathering HSLA steel with higher minimum strength (70/50 ksi) and atmospheric corrosion resistance substantially better than carbon steel, so it can often be used bare.

What is the difference between ASTM A847 and ASTM A423?

A847 is structural tubing for bridges, buildings and architecture. A423 is a pressure-tube specification for boiler parts such as air preheaters and economizers. Both use corrosion-resistant low-alloy chemistry, but they are tested for different service and are not interchangeable.

Can ASTM A847 tubes be used without painting?

Yes, in many applications. When properly exposed to wet-dry cycles, A847 tubing develops a stable patina and can be used bare. It is not recommended for continuously wet, buried or high-chloride (marine splash) conditions, where the patina cannot stabilise.

What sizes are available in ASTM A847 tubing?

Welded A847 tubing is covered up to 88 in. (2235 mm) periphery and 1 in. (25.4 mm) wall; seamless tubing up to 32 in. (813 mm) periphery and 0.500 in. (12.7 mm) wall. Other sizes can be supplied if they meet all other requirements.

What welding consumables are used for A847 tubes?

For exposed weathering structures, use weathering-grade consumables (for example E80XX-W2 or equivalent) so the weld matches the colour and corrosion behaviour of the tube. Welding procedures should be qualified for the steel and its service.

Do ASTM A847 tubes need impact testing?

Not by default. The standard notes that A847 may not suit applications where low-temperature notch toughness is important, such as dynamically loaded welded members, unless toughness testing is ordered as a supplementary requirement on the purchase order.

What is the minimum yield strength of ASTM A847 tubing?

The minimum yield strength of ASTM A847 tubing is 345 MPa (50 ksi), for both round and shaped (square and rectangular) tubing.

How long does A847 Corten tubing take to develop its patina?

Typically 6 months to 3 years outdoors, depending on climate and wet-dry cycles. The surface first shows orange rust, then darkens to a stable brown patina. Pre-weathering treatments can speed up the colour change.

Global Reach

ASC LLP supplies Corten and weathering steel products to fabricators, architects and EPC contractors around the world, with prompt delivery and full documentation. Customers in the USA, Europe, the Middle East and Asia rely on our ASTM A847 tubes for bridge, building and architectural projects.

ASC LLP global export of ASTM A847 Corten tubes

Countries We Export To

UNITED STATES, EUROPE, UK, UAE, SAUDI ARABIA, OMAN, KUWAIT, JORDAN, QATAR, INDONESIA, MALAYSIA, BRAZIL, SPAIN, ITALY, FRANCE, GERMANY, BAHRAIN, SRI LANKA, AZERBAIJAN, AUSTRALIA, AUSTRIA, PHILIPPINES, TURKEY, RUSSIA, IRAN, IRAQ, CANADA, KOREA, JAPAN, YEMEN, FINLAND, ZIMBABWE, HUNGARY, PORTUGAL, VIETNAM, MOROCCO, THAILAND, SOUTH AFRICA, MEXICO, SINGAPORE, GREECE, KUWAIT, POLAND, NEW ZEALAND, SWEDEN, SWITZERLAND, BELGIUM, BHUTAN, BANGLADESH, TAIWAN, ROMANIA, CAMBODIA, KAZAKHSTAN, AFGHANISTAN.

Follow us on: