Inconel Seamless Pipe & Tube Supplier – ASTM B167, B444, B423, B407

ASC LLP, Mumbai, supplies Inconel seamless pipe and tube in alloys 600, 601, 625, 690 and 718, plus Incoloy 800 / 800H / 800HT and 825. We supply to ASTM / ASME B167, B444, B423, B407 and B163, with EN 10204 3.1 certificates. Seamless pipe is used where pressure, temperature and corrosion leave no room for a weld seam. It is part of our Inconel product range.

Inconel Seamless Pipe – Quick Facts

  • Grades: Inconel 600, 601, 625, 690, 718; Incoloy 800 / 800H / 800HT, 825
  • Pipe specs: ASTM B167, B444, B423, B407 (ASME SB-prefix equivalents)
  • Sizes: NPS ⅛” – 8″ in SCH 5S – 160; tube 6 – 114 mm OD; larger sizes on request
  • Condition: cold-worked or hot-finished, annealed or solution-annealed
  • Ends: plain, bevelled or threaded
  • Certificate: EN 10204 3.1; 3.2 / third-party inspection on request
Inconel seamless pipes

How Seamless Inconel Pipe Is Made

Seamless Inconel pipe is produced at specialist nickel-alloy mills. ASC LLP sources it from approved mills and supplies it with full traceability. The usual production route is:

  1. Hot extrusion or piercing: a heated billet is extruded or pierced into a hollow shell with no weld seam.
  2. Cold working: the shell is cold-drawn or pilgered to final size for close tolerances and a good surface finish.
  3. Annealing: annealed or solution-annealed to the condition the ASTM specification requires.
  4. Testing: hydrostatic or eddy-current testing, dimensional and visual checks, and chemical and tensile tests per heat.

Inconel Seamless Pipe Grades & ASTM Specifications

Grade UNS Seamless pipe spec Key feature
Inconel 600 N06600 ASTM B167 Ni-Cr-Fe; oxidation, caustic and chloride-SCC resistance
Inconel 601 N06601 ASTM B167 Added aluminium; oxidation resistance to about 1,200 °C
Inconel 625 N06625 ASTM B444 (Grade 1 / Grade 2) Ni-Cr-Mo-Nb; pitting, crevice and seawater resistance, high strength
Inconel 690 N06690 ASTM B167 30% Cr; oxidising acids and nuclear steam-generator service
Inconel 718 N07718 AMS 5589 / AMS 5590 (tube) Age-hardenable; very high strength
Incoloy 800 / 800H / 800HT N08800 / N08810 / N08811 ASTM B407 Fe-Ni-Cr; 800H / 800HT for creep service above 593 °C
Incoloy 825 N08825 ASTM B423 Ni-Fe-Cr-Mo-Cu; sulphuric / phosphoric acid and sour service

Heat-exchanger and condenser tube in 600, 690, 800 and 825 is also supplied to ASTM B163. General requirements for nickel-alloy seamless pipe and tube are given in ASTM B829.

Inconel Pipe Grade Pages

Inconel Seamless Pipe Sizes & Wall Thickness

Pipe: NPS ⅛” to 8″ (10.3 – 219.1 mm OD) in SCH 5S, 10S, 40S, 80S and 160. Tube: 6 – 114 mm OD in metric or inch walls. Length: single random, double random or cut length. Wall thicknesses follow ASME B36.19 (stainless and nickel-alloy pipe), as shown below.

Schedule Chart – ASME B36.19 Wall Thickness (inches)

NPS OD (in) SCH 5S SCH 10S SCH 40S SCH 80S
½” 0.840 0.065 0.083 0.109 0.147
¾” 1.050 0.065 0.083 0.113 0.154
1″ 1.315 0.065 0.109 0.133 0.179
1½” 1.900 0.065 0.109 0.145 0.200
2″ 2.375 0.065 0.109 0.154 0.218
3″ 3.500 0.083 0.120 0.216 0.300
4″ 4.500 0.083 0.120 0.237 0.337
6″ 6.625 0.109 0.134 0.280 0.432
8″ 8.625 0.109 0.148 0.322 0.500

Mechanical Properties of Inconel Seamless Pipe (ASTM Minimums)

Grade & spec Condition Tensile (min) Yield 0.2% (min) Elongation (min)
600 – B167 Cold-worked annealed, ≤ 5″ OD 550 MPa (80 ksi) 240 MPa (35 ksi) 30%
600 – B167 Hot-worked annealed, ≤ 5″ OD 550 MPa (80 ksi) 205 MPa (30 ksi) 35%
601 – B167 Annealed, all sizes 550 MPa (80 ksi) 205 MPa (30 ksi) 30%
690 – B167 Cold-worked annealed, ≤ 5″ OD 586 MPa (85 ksi) 240 MPa (35 ksi) 30%
625 – B444 Grade 1, annealed 827 MPa (120 ksi) 414 MPa (60 ksi) 30%
625 – B444 Grade 2, solution-annealed 690 MPa (100 ksi) 276 MPa (40 ksi) 30%
825 – B423 Cold-worked annealed 586 MPa (85 ksi) 241 MPa (35 ksi) 30%
825 – B423 Hot-finished annealed 517 MPa (75 ksi) 172 MPa (25 ksi) 30%
800 – B407 Cold-worked annealed 520 MPa (75 ksi) 205 MPa (30 ksi) 30%
800H / 800HT – B407 Annealed 450 MPa (65 ksi) 170 MPa (25 ksi) 30%

Inconel 718 tube is normally supplied solution-annealed and age-hardened after fabrication; its properties follow the AMS specification ordered.

Related Specifications – Seamless vs Welded

Specification Covers
ASTM B167 / ASME SB167 Seamless pipe and tube – 600, 601, 690, 617 and related Ni-Cr-Fe alloys
ASTM B444 / ASME SB444 Seamless pipe and tube – 625 (Grade 1 annealed, Grade 2 solution-annealed)
ASTM B423 / ASME SB423 Seamless pipe and tube – 825
ASTM B407 / ASME SB407 Seamless pipe and tube – 800, 800H, 800HT
ASTM B163 / ASME SB163 Seamless condenser and heat-exchanger tubes
ASTM B829 General requirements for nickel-alloy seamless pipe and tube
ASTM B705 / B704 Welded 625 and 825 pipe / tube – see Inconel welded pipes

Chemical Composition of Inconel Pipe Grades (wt %)

Grade Ni Cr Fe Mo Other key elements C max
600 72.0 min 14.0 – 17.0 6.0 – 10.0 – Cu 0.5 max 0.15
601 58.0 – 63.0 21.0 – 25.0 Balance – Al 1.0 – 1.7 0.10
625 58.0 min 20.0 – 23.0 5.0 max 8.0 – 10.0 Nb+Ta 3.15 – 4.15 0.10
690 58.0 min 27.0 – 31.0 7.0 – 11.0 – – 0.05
718 50.0 – 55.0 17.0 – 21.0 Balance 2.80 – 3.30 Nb 4.75 – 5.50, Ti 0.65 – 1.15, Al 0.2 – 0.8 0.08
800 / 800H / 800HT 30.0 – 35.0 19.0 – 23.0 39.5 min – Al 0.15 – 0.60, Ti 0.15 – 0.60 0.10 (800H/HT 0.05 – 0.10)
825 38.0 – 46.0 19.5 – 23.5 22.0 min 2.5 – 3.5 Cu 1.5 – 3.0, Ti 0.6 – 1.2 0.05

Spec limits shown for the main elements; Mn, Si, S and other limits are on each grade page and on the mill certificate. 800HT also requires Al + Ti 0.85 – 1.20%.

Applications of Inconel Seamless Pipe

Grade Typical seamless pipe applications
600 Furnace and heat-treatment equipment, caustic soda and chemical processing, food processing
601 Radiant tubes, furnace muffles and retorts, thermal-processing equipment
625 Offshore and seawater piping, chemical process lines, flue-gas scrubbers, aircraft exhaust ducting
690 Nuclear steam-generator tubing, nitric and other oxidising-acid service
718 High-strength, high-pressure tubing for oil & gas and aerospace components
800H / 800HT Reformer pigtails and headers, ethylene furnaces, superheater and reheater tubing
825 Sulphuric and phosphoric acid plants, sour oil & gas lines, pickling equipment

Which Inconel Grade Do You Need?

  • High-temperature oxidation (above 1,000 °C): 601, or 800H / 800HT where creep strength matters.
  • Seawater, chlorides, pitting: 625.
  • Sulphuric / phosphoric acid, sour gas: 825.
  • Caustic and general high-temperature service: 600.
  • Oxidising acids, nuclear steam generators: 690.
  • Very high strength: 718 (age-hardened).

Why Choose ASC LLP as Your Inconel Pipe Supplier?

  • All major grades: 600, 601, 625, 690, 718, 800 / 800H / 800HT and 825 from one supplier.
  • Correct specification: pipe certified to the right ASTM / ASME standard and condition – not a generic “Inconel” certificate.
  • Matched packages: pipe with Inconel fittings, flanges and fasteners in the same grade.
  • Cut lengths and small quantities, plus export packing.

Testing & Documentation

Standard tests per the ASTM specification: chemical analysis, tensile test, flattening / flaring, hydrostatic or eddy-current (non-destructive electric) test, and dimensional and visual inspection. Options on request: PMI, intergranular corrosion testing (e.g. ASTM G28 for 625 / 825), ultrasonic testing and third-party inspection. Supplied with EN 10204 3.1 certificates.

Request a Quote

Send grade, specification, NPS or OD × wall, schedule, length and quantity to sales@amardeepsteel.com or call 022-67439130.

Frequently Asked Questions – Inconel Seamless Pipe

Which ASTM specification covers Inconel seamless pipe?

It depends on the grade: ASTM B167 covers Inconel 600, 601 and 690; ASTM B444 covers Inconel 625; ASTM B423 covers Incoloy 825; and ASTM B407 covers Incoloy 800, 800H and 800HT. ASME equivalents carry the SB prefix.

What is the difference between seamless and welded Inconel pipe?

Seamless pipe is extruded or pierced from a solid billet and has no weld seam, so it is preferred for high pressure and critical service. Welded pipe (for example ASTM B705 for 625 and 825) is formed from plate or strip and welded, and is more economical in larger sizes.

What sizes of Inconel seamless pipe are available?

Seamless Inconel pipe is commonly available from NPS ⅛” to 8″ in schedules 5S to 160, and as tube from about 6 to 114 mm OD. Larger sizes can be supplied on request.

What is the difference between ASTM B444 Grade 1 and Grade 2?

Both are Inconel 625. Grade 1 is annealed and has higher strength (827 MPa tensile, 414 MPa yield minimum). Grade 2 is solution-annealed (690 MPa tensile, 276 MPa yield minimum) for better creep and rupture resistance above about 595 °C.

Are Incoloy 800 and 825 the same as Inconel?

No. Incoloy 800, 800H, 800HT and 825 are iron-nickel-chromium alloys, while the Inconel grades are nickel-chromium based. They are often grouped together and are supplied as seamless pipe to ASTM B407 (800 series) and B423 (825).

Which Inconel pipe is best for seawater?

Inconel 625 (ASTM B444) is the usual choice for seawater and chloride service because its molybdenum and niobium give high resistance to pitting and crevice corrosion.

Global Reach

ASC LLP supplies nickel-alloy piping to customers in the USA, Europe, the Middle East and Asia, with secure packing and full documentation. Buyers worldwide rely on our Inconel seamless pipe for certified material and traceability.

ASC LLP global export of Inconel seamless pipes

Countries We Export To

UNITED STATES, EUROPE, UK, UAE, SAUDI ARABIA, OMAN, KUWAIT, JORDAN, QATAR, INDONESIA, MALAYSIA, BRAZIL, SPAIN, ITALY, FRANCE, GERMANY, BAHRAIN, SRI LANKA, AZERBAIJAN, AUSTRALIA, AUSTRIA, PHILIPPINES, TURKEY, RUSSIA, IRAN, IRAQ, CANADA, KOREA, JAPAN, YEMEN, FINLAND, ZIMBABWE, HUNGARY, PORTUGAL, VIETNAM, MOROCCO, THAILAND, SOUTH AFRICA, MEXICO, SINGAPORE, GREECE, KUWAIT, POLAND, NEW ZEALAND, SWEDEN, SWITZERLAND, BELGIUM, BHUTAN, BANGLADESH, TAIWAN, ROMANIA, CAMBODIA, KAZAKHSTAN, AFGHANISTAN.

Follow us on: